pressure dependence of band gap  [SOLVED]

GW, Bethe-Salpeter …

Moderators: maryam.azizi, bruneval

Locked
User avatar
new_986
Posts: 77
Joined: Wed Aug 04, 2010 9:27 pm

pressure dependence of band gap

Post by new_986 » Tue Aug 28, 2018 11:02 am

Hi all
I want to calculate band gap of a perovskite structure at different pressures, first I did cell optimization of different pressures, then I used optimized lattice constant and relaxed atomic coordinates as inputs to calculate band gap
As it's known band gap should increase with increasing pressure, but from pressure 1 Gpa to 5 Gpa , my band gaps decreasing, my question is:
Is this a correct way to calculate pressure dependence band gap? if no , what method I should use in abinit? if yes why this is happening with me?

regards

Nawzad
Attachments
pressure+.in
Input for optimization in different pressures
(1.1 KiB) Downloaded 395 times
CsPbCl3B3LPY.out
Output
(541.52 KiB) Downloaded 354 times
CsPbCl3B3LPY.in
Input for band gap at 1 Gpa pressure
(1.25 KiB) Downloaded 344 times
pressure+.out
Output
(177.05 KiB) Downloaded 339 times

ebousquet
Posts: 469
Joined: Tue Apr 19, 2011 11:13 am
Location: University of Liege, Belgium

Re: pressure dependence of band gap  [SOLVED]

Post by ebousquet » Wed Sep 12, 2018 11:39 am

Dear Nawzad,
I would say that the band gap will have the tendency to reduce with pressure in general, no? But I might be wrong, do you have references that show increase of the band gap under pressure in perovskites? Of course this could depend on the system...
Best wishes,
Eric

User avatar
new_986
Posts: 77
Joined: Wed Aug 04, 2010 9:27 pm

Re: pressure dependence of band gap

Post by new_986 » Fri Sep 14, 2018 11:56 am

Dear Eric
Yes band gap reduces with increasing of pressure...but I have seen in references, for example, for CsPbI3 phase transition happens from cubic to orthohombic before 0.4 Gpa, But I have increased pressure up to 1 Gpa,
my question is, How I know when phase changes in abinit?

Thanks for replying and help

Nawzad

rajaraman
Posts: 7
Joined: Sat Sep 15, 2018 7:08 pm
Location: Kalpakkam, India

Re: pressure dependence of band gap

Post by rajaraman » Mon Sep 24, 2018 10:15 am

Dear Nawzad,
calculate total energy as a function of pressure for both cubic and orthorhombic structures.
there will be crossover at some pressure (you said experimental one is 0.4GPa).
You have to use the bandgaps corrosponding to minimum energy structure at each pressure.
regards
-rajaraman

User avatar
new_986
Posts: 77
Joined: Wed Aug 04, 2010 9:27 pm

Re: pressure dependence of band gap

Post by new_986 » Tue Oct 02, 2018 12:39 pm

rajaraman wrote:Dear Nawzad,
calculate total energy as a function of pressure for both cubic and orthorhombic structures.
there will be crossover at some pressure (you said experimental one is 0.4GPa).
You have to use the bandgaps corrosponding to minimum energy structure at each pressure.
regards
-rajaraman

Dear rajaraman
Thanks a lot for the reply,,, I will try that
Regards
Nawzad

User avatar
new_986
Posts: 77
Joined: Wed Aug 04, 2010 9:27 pm

Re: pressure dependence of band gap

Post by new_986 » Mon Nov 05, 2018 10:05 am

rajaraman wrote:Dear Nawzad,
calculate total energy as a function of pressure for both cubic and orthorhombic structures.
there will be crossover at some pressure (you said experimental one is 0.4GPa).
You have to use the bandgaps corrosponding to minimum energy structure at each pressure.
regards
-rajaraman

Dear rajaraman
I have calculated total energy of cubic and tetragonal of CsPbCl3 , but it gives me same energy for both structures
any help plz?
best regards


Nawzad
Attachments
Untitled.jpg
optimiztion.in
(1.55 KiB) Downloaded 350 times
optimiztion.in
(1.39 KiB) Downloaded 303 times

Locked