Make error 9.0.4  [SOLVED]

option, parallelism,...

Moderators: fgoudreault, mcote

Forum rules
Please have a look at ~abinit/doc/config/build-config.ac in the source package for detailed and up-to-date information about the configuration of Abinit 8 builds.
For a video explanation on how to build Abinit 7.x for Linux, please go to: http://www.youtube.com/watch?v=DppLQ-KQA68.
IMPORTANT: when an answer solves your problem, please check the little green V-like button on its upper-right corner to accept it.
Locked
tback
Posts: 2
Joined: Mon Jun 08, 2020 8:44 pm

Make error 9.0.4  [SOLVED]

Post by tback » Fri Jun 19, 2020 3:59 pm

I'm running Fedora 32 with gcc 10.1. I can run configure successfully (results below). However, I am getting errors with make. Not sure how to correct this (error output below)? Can anyone help?

Configuration Results:

Code: Select all

Core build parameters
---------------------

  * C compiler       : gnu version 10.1
  * Fortran compiler : gnu version 10.1
  * architecture     : unknown unknown (64 bits)
  * debugging        : basic
  * optimizations    : standard

  * OpenMP enabled   : no (collapse: ignored)
  * MPI    enabled   : yes (flavor: auto)
  * MPI    in-place  : yes
  * MPI-IO enabled   : yes
  * GPU    enabled   : no (flavor: none)

  * LibXML2 enabled  : no
  * HDF5 enabled     : yes (MPI support: yes)
  * NetCDF enabled   : yes (MPI support: yes)
  * NetCDF-F enabled : yes (MPI support: yes)

  * FFT flavor       : goedecker (libs: auto-detected)
  * LINALG flavor    : netlib+openblas (libs: auto-detected)

  * Build workflow   : monolith

0 deprecated options have been used:.

Configuration complete.
You may now type "make" to build Abinit.
(or "make -j<n>", where <n> is the number of available processors)
ERROR OUTPUT:

Code: Select all

mpifort -DHAVE_CONFIG_H -I. -I../../..  -I../../../shared/common/src/10_defs -I../../../shared/common/src/10_defs -I../../../shared/common/src/11_memory_mpi -I../../../shared/common/src/11_memory_mpi -I../../../shared/common/src/12_hide_mpi -I../../../shared/common/src/12_hide_mpi -I../../../shared/common/src/14_hidewrite -I../../../shared/common/src/14_hidewrite -I../../../shared/common/src/16_hideleave -I../../../shared/common/src/16_hideleave -I../../../shared/common/src/33_xc_lowlevel -I../../../shared/common/src/33_xc_lowlevel -I../../../shared/libpaw/src -I../../../shared/libpaw/src -I../../../shared/common/src/incs -I../../../shared/common/src/incs -I../../../shared/common/src/mods -I../../../shared/common/src/mods -I../../../src/incs -I../../../src/incs -I../../../src/mods -I../../../src/mods -I../../../shared/libpaw/incs -I../../../shared/libpaw/incs -I../../../shared/libpaw/mods -I../../../shared/libpaw/mods -I/usr/lib64/gfortran/modules/openmpi/   -ffree-form -J../mods   -w -fallow-argument-mismatch -O2     -c -o m_pawrhoij.o m_pawrhoij.F90
m_pawrhoij.F90:2450:132:

 2450 |           NCF_CHECK(nf90_inq_dimid(ncid, "pawrhoij_cplex", cplex_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2451:132:

 2451 |           NCF_CHECK(nf90_inquire_dimension(ncid, cplex_id, len=my_cplex))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2453:132:

 2453 |           NCF_CHECK(nf90_inq_varid(ncid, "rhoijsel_atoms", nsel56_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2454:132:

 2454 |           NCF_CHECK(nf90_get_var(ncid, nsel56_id, nsel56))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2466:132:

 2466 |            NCF_CHECK(nf90_inq_dimid(ncid, "pawrhoij_cplex", cplex_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2467:132:

 2467 |            NCF_CHECK(nf90_inquire_dimension(ncid, cplex_id, len=my_cplex))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2468:132:

 2468 |            NCF_CHECK(nf90_inq_dimid(ncid, "pawrhoij_nspden", nspden_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2469:132:

 2469 |            NCF_CHECK(nf90_inquire_dimension(ncid, nspden_id, len=my_nspden))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2470:132:

 2470 |            NCF_CHECK(nf90_inq_varid(ncid, "nrhoijsel_atoms", nsel56_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2471:132:

 2471 |            NCF_CHECK(nf90_get_var(ncid, nsel56_id, nsel56))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2473:132:

 2473 |              NCF_CHECK(nf90_inquire_dimension(ncid, qphase_id, len=my_qphase))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2495:132:

 2495 |            NCF_CHECK(nf90_inq_varid(ncid, "rhoijselect_atoms", ibuffer_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2496:132:

 2496 |            NCF_CHECK(nf90_get_var(ncid, ibuffer_id, ibuffer))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2497:132:

 2497 |            NCF_CHECK(nf90_inq_varid(ncid, "rhoijp_atoms", buffer_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2498:132:

 2498 |            NCF_CHECK(nf90_get_var(ncid, buffer_id, buffer))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2541:132:

 2541 |          NCF_CHECK(nf90_def_dim(ncid, "number_of_atoms", natom, natom_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2543:132:

 2543 |        NCF_CHECK(nf90_def_var(ncid, "nrhoijsel_atoms", NF90_INT, natom_id, nsel56_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2545:132:

 2545 |        NCF_CHECK(nf90_def_dim(ncid, "pawrhoij_cplex", my_cplex, cplex_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2546:132:

 2546 |        NCF_CHECK(nf90_def_dim(ncid, "pawrhoij_nspden", my_nspden, nspden_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2547:132:

 2547 |        NCF_CHECK(nf90_def_dim(ncid, "pawrhoij_qphase", my_qphase, qphase_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2549:132:

 2549 |          NCF_CHECK(nf90_def_dim(ncid, "rhoijselect_atoms_dim", bsize, bsize_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2550:132:

 2550 |          NCF_CHECK(nf90_def_dim(ncid, "rhoijp_atoms_dim", bsize*my_nspden*my_qphase*my_cplex, bufsize_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2552:132:

 2552 |          NCF_CHECK(nf90_def_var(ncid, "rhoijselect_atoms", NF90_INT, bsize_id, ibuffer_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2553:132:

 2553 |          NCF_CHECK(nf90_def_var(ncid, "rhoijp_atoms", NF90_DOUBLE, bufsize_id, buffer_id))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2561:132:

 2561 |        NCF_CHECK(nf90_put_var(ncid, nsel56_id, nsel56))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2585:132:

 2585 |          NCF_CHECK(nf90_put_var(ncid, ibuffer_id, ibuffer))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
m_pawrhoij.F90:2586:132:

 2586 |          NCF_CHECK(nf90_put_var(ncid, buffer_id,  buffer))
      |                                                                                                                                    1
Error: Missing ‘)’ in statement at or before (1)
make[4]: *** [Makefile:1272: m_pawrhoij.o] Error 1
make[4]: Leaving directory '/home/backtc/Documents/ABINIT/abinit-9.0.4/shared/libpaw/src'
make[3]: *** [Makefile:1161: all-recursive] Error 1
make[3]: Leaving directory '/home/backtc/Documents/ABINIT/abinit-9.0.4/shared/libpaw'
make[2]: *** [Makefile:1156: all-recursive] Error 1
make[2]: Leaving directory '/home/backtc/Documents/ABINIT/abinit-9.0.4/shared'
make[1]: *** [Makefile:1441: all-recursive] Error 1
make[1]: Leaving directory '/home/backtc/Documents/ABINIT/abinit-9.0.4'
make: *** [Makefile:1366: all] Error 2
Top
User avatar
gmatteo
Posts: 291
Joined: Sun Aug 16, 2009 5:40 pm

Re: Make error 9.0.4

Post by gmatteo » Sat Jun 20, 2020 4:36 pm

It seems the compiler is ignoring characters beyond column 132.
Can you reconfigure with:

FCFLAGS="-g -O2 --free-line-length-none"

M
Top
User avatar
jbeuken
Posts: 365
Joined: Tue Aug 18, 2009 9:24 pm
Contact:
Contact jbeuken

Re: Make error 9.0.4

Post by jbeuken » Sat Jun 20, 2020 6:43 pm

Hi,

GNU 10.1 is not yet supported...
The last GNU version supported is 9.3

I tried, but, yes, there are problems... :roll: :roll:
See:
https://gcc.gnu.org/gcc-10/porting_to.html

jmb
------
Jean-Michel Beuken
Computer Scientist
Top
User avatar
jbeuken
Posts: 365
Joined: Tue Aug 18, 2009 9:24 pm
Contact:
Contact jbeuken

Re: Make error 9.0.4

Post by jbeuken » Sat Jun 20, 2020 10:31 pm

Hi,

The suggestion of gmatteo is the solution !
I'm just tested under Fedora 32 / OpenMPI / GNU 10.1 ( under VirtualBox VM )

I don't know your ac9 file, but here's mine.

Code: Select all

FCFLAGS_EXTRA="-g -O2 --free-line-length-none -fallow-argument-mismatch -w"

with_mpi="${MPI_HOME}"
enable_mpi_io="yes"

with_linalg_flavor="openblas"
LINALG_LIBS="-L/usr/lib64 -lopenblas"

with_fft_flavor="fftw3"
FFTW3_CPPFLAGS="-I/usr/include"
FFTW3_FCFLAGS="-I/usr/include"
FFTW3_LIBS="-L/usr/lib64 -lfftw3 -lfftw3f"

with_libxc="/usr/lib64"

with_hdf5="/usr/lib64/openmpi"
with_netcdf="/usr/lib64/openmpi"

NETCDF_FORTRAN_CFLAGS="`nf-config --cflags`"
NETCDF_FORTRAN_LIBS="`nf-config --flibs`"
NETCDF_FORTRAN_FCFLAGS="`nf-config --fflags`"

WANNIER90_LIBS="-L/usr/lib64 -lwannier"

with_libxml2="yes"

enable_gw_dpc="yes"
I ran some tests( fast and libxc ) : Passed 8-)

thanks
------
Jean-Michel Beuken
Computer Scientist
Top
tback
Posts: 2
Joined: Mon Jun 08, 2020 8:44 pm

Re: Make error 9.0.4

Post by tback » Sun Jun 21, 2020 7:21 pm

Thanks gmatteo and jbeuken! I now have a working version of Abinit!
Top
Locked

Return to “Configuring and compiling ABINIT”