Error while enabling BIGDFT..linXC...linalg  [SOLVED]

option, parallelism,...

Moderators: jbeuken, Jordan, pouillon

Forum rules
Please have a look at ~abinit/doc/config/build-config.ac in the source package for detailed and up-to-date information about the configuration of Abinit 8 builds.
For a video explanation on how to build Abinit 7.x for Linux, please go to: http://www.youtube.com/watch?v=DppLQ-KQA68.
IMPORTANT: when an answer solves your problem, please check the little green V-like button on its upper-right corner to accept it.
Post Reply
schopra1980
Posts: 13
Joined: Mon Jan 13, 2014 7:41 am

Error while enabling BIGDFT..linXC...linalg

Post by schopra1980 » Wed Feb 05, 2014 11:08 am

Dear Sir,
I am installing ABINIT-7.6.1 with the following command:

./configure --enable-mpi --enable-openmp --enable-mpi-fft --enable-mpi-io --enable-mpi-trace --with-mpi-prefix=/usr/lib/mpich-3.0.4 --enable-libxc=yes --enable-linalg=yes --enable-netcdf=yes --enable-wannier90=yes --enable-atompaw=yes --enable-bigdft=yes --enable-etsf-io=yes --enable-fox=yes

I want to enable BIGDFT etc.. But the config.log says:
configure:36194: checking whether to build atompaw
configure:36196: result: no
configure:36194: checking whether to build bigdft
configure:36196: result: no
configure:36194: checking whether to build etsf_io
configure:36196: result: no
configure:36194: checking whether to build fox
configure:36196: result: no
configure:36194: checking whether to build libxc
configure:36196: result: no
configure:36194: checking whether to build linalg
configure:36196: result: no
configure:36194: checking whether to build netcdf
configure:36196: result: no
configure:36194: checking whether to build wannier90
configure:36196: result: no.

Please help me.. I don't know how to link them to ABINIT. Especially LinXC.

Regards,
Attachments
config.log
(107.38 KiB) Downloaded 371 times
Dr. Siddheshwar chopra,
M.Sc., Ph.D (Physics)
Assistant Professor (Physics),
Amity University, Noida, India.

User avatar
pouillon
Posts: 651
Joined: Wed Aug 19, 2009 10:08 am
Location: Spain
Contact:

Re: Error while enabling BIGDFT..linXC...linalg  [SOLVED]

Post by pouillon » Thu Feb 06, 2014 4:17 pm

I moved this topic to "Configuration", where it actually belongs. Here you will find all necessary information in the red "Forum rules" box, at the top of each page.
Yann Pouillon
Simune Atomistics
Donostia-San Sebastián, Spain

Post Reply