Page 1 of 1

Too many tests failed during runtests.py execution

Posted: Thu May 07, 2015 5:08 am
by Manoj Kumar Sharma
Dear All,
I have installed abinit 7.1.0.4 on Ubuntu 14.04.2 LTS. After installation I run runtests.py file, it took some time to finish and I got 18 error messages of tests failure (please see below). Then I checked abinit forum for similar problems and I found some relevant post. In one post there was only one test failure error for libxc compared to mine (18). Now I am not sure whether my abinit installation is ok. If the installation is ok then what maybe the source of problem. Please suggest.

Suite failed passed succeeded skipped disabled run_etime tot_etime
atompaw 0 1 1 0 0 23.08 23.48
bigdft 2 0 18 2 0 555.67 556.89
built-in 0 0 6 1 0 6.19 6.21
etsf_io 0 0 0 7 0 0.00 0.00
fast 0 1 10 0 0 55.81 58.01
fox 0 0 0 2 0 0.00 0.00
gpu 0 0 0 4 0 0.00 0.00
libxc 3 4 14 0 0 442.38 448.28
mpiio 0 0 1 13 0 2.04 2.12
paral 2 5 14 69 0 799.90 805.67
seq 0 0 0 19 0 0.00 0.01
tutoparal 0 0 1 1 0 0.67 0.71
tutoplugs 0 4 0 0 0 39.87 40.27
tutorespfn 0 12 11 0 0 1806.27 1827.38
tutorial 1 9 38 0 0 1699.86 1711.00
unitary 0 0 21 13 0 175.91 176.80
v1 0 7 69 0 0 307.58 317.75
v2 1 12 66 0 0 450.04 463.79
v3 1 12 67 0 0 494.26 515.01
v4 0 18 44 0 0 687.49 705.04
v5 2 18 54 0 0 1846.10 1877.87
v6 1 14 45 0 0 1320.04 1343.01
v67mbpt 2 4 12 0 0 641.63 648.60
v7 3 15 14 0 0 2156.98 2171.61
vdwxc 0 0 1 0 0 37.40 37.46
wannier90 0 7 0 0 0 82.83 83.46

Sincere regards,
Manoj Kumar Sharma
PAL, Republic of Korea

Re: Too many tests failed during runtests.py execution

Posted: Thu Jun 04, 2015 8:22 pm
by jzwanzig
Indeed you should not have that many tests fail. You need to look into why they are failing, it could be that some of them fail because they can't find some component they need (that is, there is an issue with the way you built the system on your particular architecture).