not obtaining WFK file in .nc format

MULTIBINIT, aTDEP, ANADDB, optics, cut3d, mrg* postprocessors

Moderators: MMNSchmitt, gonze

Locked
westworld
Posts: 2
Joined: Sat Jan 13, 2018 8:52 am

not obtaining WFK file in .nc format

Post by westworld » Sun Jan 21, 2018 7:12 am

I have built my ABINIT-8.4.4 with netcdf as the trio flavor. Although i am getting quite some files in the .nc format ,
except the WFK files. On searching a bit i found and employed accesswff = 3 as an input varible to my .in file.
but the run stops with an error that accesswff is not a registered ABINIT input variable.
i checked the variable on the site and found it as categorized in development stage.
I need the WFK files in .nc format for some scripts of ABIPY which only accepts these.


I am attaching th log file of the error.
Also attached is my configuration file i used to build ABINIT-8.4.4.
Attachments
error.log
output log file
(26.58 KiB) Downloaded 299 times
simple_config.log
configuration file to build ABINIT
(453 Bytes) Downloaded 311 times

Locked