Hi,
im new in this forum new to abinit and not very used to linux so please be patient
My question refers to abipy. I need .nc output from abinit to do the post processing.
But I dont get the needed output data.
Can anyone tell me why?
Thanks alot
Visum
How I do get .nc output?
Moderators: MMNSchmitt, gonze
Re: How I do get .nc output?
Hi Visum,
This is because you have to link Abinit with Netcdf file format (giving the .nc files) as follows in your configure.ac file (if you made one):
where netcdf-installation-path is where Netcdf has been installed on your machine.
If you didn't installed Netcdf please look at the following Wiki page:
https://wiki.abinit.org/doku.php?id=tip ... ing_abinit
All the best,
Eric
This is because you have to link Abinit with Netcdf file format (giving the .nc files) as follows in your configure.ac file (if you made one):
Code: Select all
with_netcdf_incs="-I/netcdf-installation-path/include"
with_netcdf_libs="-L/netcdf-installation-path/lib -lnetcdf -lnetcdff"
with_trio_flavor="netcdf"
where netcdf-installation-path is where Netcdf has been installed on your machine.
If you didn't installed Netcdf please look at the following Wiki page:
https://wiki.abinit.org/doku.php?id=tip ... ing_abinit
All the best,
Eric
-
- Posts: 2
- Joined: Mon Oct 14, 2019 3:03 pm
Re: How I do get .nc output?
Dear Prof. Boustique,
I also have similar problem , abinit doesn't produce nc files ,although I tried many ways to link abinit with netcdf . I am using abinit 8.1.3
the attached link doesn't work https://wiki.abinit.org/doku.php?id=tip ... ing_abinit, it gives the following message 'Permission Denied
Sorry, you don't have enough rights to continue.
'
Thank you very much for any help
with best regards
I also have similar problem , abinit doesn't produce nc files ,although I tried many ways to link abinit with netcdf . I am using abinit 8.1.3
the attached link doesn't work https://wiki.abinit.org/doku.php?id=tip ... ing_abinit, it gives the following message 'Permission Denied
Sorry, you don't have enough rights to continue.
'
Thank you very much for any help
with best regards
Re: How I do get .nc output?
Hi Abdullah
I have the same problem, have you fixed it?
Best regards
I have the same problem, have you fixed it?
Best regards